Branch Recalls Ergonomic Chairs Due to Fall Hazard
The backrests of the chairs can detach, posing a fall hazard to consumers.
Giantex Lounge Chairs was recalled on May 28, 2026 in cooperation with the U.S. Consumer Product Safety Commission because consumers can place their fingers in a pinch point, when adjusting the lounge chair, posing an amputation risk..

This recall involves Giantex outdoor lounge chairs with model number NP10025NY. The recalled lounge chairs are blue and measure 76-inches long, by 23-inches wide, by 13-inches high. They have a five-position adjustable locking system and the backrest height can be adjusted from 13.5 inches to 26.5 inches. Model number NP10025NY is printed on the front and side of the product packaging.
Units affected: About 1,155
Where it was sold: Giantex.com and Amazon.com from August 2023 through October 2025 for between $75 and $90.
Compare the codes above against the label on your product — usually on the bottom, the back panel, or the packaging. If your unit isn't listed, it is not part of this recall.
Consumers can place their fingers in a pinch point, when adjusting the lounge chair, posing an amputation risk.
Consumers should stop using the recalled lounge chairs immediately and contact Giantex for a full refund. Consumers will be instructed to either request a prepaid return package or will be asked to destroy the recalled lounge chair by detaching the headrest pillow, cutting the fabric, and providing photographic proof of destruction. (Remedy: Refund)
Contact: Giantex toll-free at 844-242-1885 anytime, email at support@giantex.com, or online at https://www.giantex.com/pages/product-recall-notice, or https://www.giantex.com/ and click on "RECALL INFORMATION" at the top of the page for more information.
Not sure what you're entitled to? Read our guide: what to do if your product is recalled.
Always confirm details on the official notice from the U.S. Consumer Product Safety Commission before acting.
View official notice →The backrests of the chairs can detach, posing a fall hazard to consumers.
The snubber circuit can emit flames if it shorts, posing a risk of serious injury due to fire hazard.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
Be the first to know when products like this are recalled. Free weekly digest, unsubscribe anytime.