DIY Cold Plunge Sauna Heater Kits was recalled on March 26, 2026 in cooperation with the U.S. Consumer Product Safety Commission because electrical conductors within the sauna heater kits can overheat, posing a fire hazard and risk of serious injury or death..
This recall involves the DIY Sauna Heater Kit. The product is a do-it-yourself kit for consumers to assemble a heating fixture with four heat-lamp bulbs (sold separately) and a metal enclosure intended for use in a separate do-it-yourself sauna enclosure, for which carpentry plans are sold separately. The Sauna Heater Kit includes a stainless steel cage (which weighs about 16 lbs., and measures 12"H x 12"W x 8"D when assembled), screws/bolts for assembly, four ceramic bulb sockets, three wire connectors, two ground pigtails, and a three-prong power cord. The recalled Sauna Heater Kit is intended to attach to a customer-built wood frame.
Units affected: About 675 (In addition, about 14 were sold in Canada)
Where it was sold: Online at www.diycoldplunge.com from March 2025 through February 2026 for between $400 and $500.
Compare the codes above against the label on your product — usually on the bottom, the back panel, or the packaging. If your unit isn't listed, it is not part of this recall.
Electrical conductors within the sauna heater kits can overheat, posing a fire hazard and risk of serious injury or death.
Consumers should stop using the recalled Sauna Heater Kit immediately and register at www.diycoldplunge.com/pages/recall for a full refund. Consumers will be asked to submit written and photo proof that the product has been destroyed/disposed of or request a prepaid shipping label to return the product. (Remedy: Refund)
Contact: DIY Cold Plunge by email at orders@diycoldplunge.com or online at www.diycoldplunge.com/pages/recall or www.diycoldplunge.com and click on "Recall Information" at the bottom of the page for more information.
Not sure what you're entitled to? Read our guide: what to do if your product is recalled.
Always confirm details on the official notice from the U.S. Consumer Product Safety Commission before acting.
View official notice →The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risk of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
The recalled chandeliers lack proper electrical grounding, posing a risk of serious injury or death from electrocution hazard.
The regulator inlet tube can crack and break, posing a risk of serious injury or death from drowning.
Be the first to know when products like this are recalled. Free weekly digest, unsubscribe anytime.