Sanven Technology Vevor Baby Gates was recalled on February 26, 2026 in cooperation with the U.S. Consumer Product Safety Commission because the recalled gates violate the mandatory standard for expansion gates and expandable enclosures because a child's torso can fit through the…
This recall involves Vevor-branded safety gates. The recalled safety gates were sold in gray, black and white and have a metal frame about 34.2 inches high and a retractable screen that extends up to 60 inches wide (model YJ-3355), 76.8 inches wide (model YJ-3371) or 116 inches wide (model YJ-33110). "Vevor" is printed on a label on the corner post of the gate. The model number is printed on the product packaging and in the user manual.
Units affected: About 10,400
Where it was sold: Online at Amazon.com, Homedepot.com, Vevor.com, Walmart.com and Wayfair.com from December 2023 through December 2025 for between $32 and $53.
Compare the codes above against the label on your product — usually on the bottom, the back panel, or the packaging. If your unit isn't listed, it is not part of this recall.
The recalled gates violate the mandatory standard for expansion gates and expandable enclosures because a child's torso can fit through the opening between the gate and the floor, posing a risk of serious injury due to entrapment.
Consumers should stop using the recalled gates immediately and contact Sanven Technology for a full refund. Consumers should destroy the gate by cutting through the mesh and send a photo of the destroyed gate to recalling@vevor.com. (Remedy: Refund)
Contact: Sanven Technology toll-free at 855-599-6320 from 9 a.m. to 5 p.m. PT Monday through Friday, email at recalling@vevor.com, or online at https://www.vevor.com/pages/Vevor-Retractable-Baby-Gates-Recall or at www.vevor.com and click "Product Recall" at the top of the page for more information.
Not sure what you're entitled to? Read our guide: what to do if your product is recalled.
Always confirm details on the official notice from the U.S. Consumer Product Safety Commission before acting.
View official notice →The recalled teething toys violate the mandatory standard for toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of children's throat and become lodged, posing a serious risk of respiratory distress and deadly choking hazard.
The recalled teething toy sets contain a pull string teething toy that violates the mandatory standard for toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of a child's throat and become lodged, posing a risk of respiratory distress and a deadly choking hazard.
The snap can detach from the recalled bibs and stroller bags, posing a risk of serious injury or death from a choking hazard to young children.
The paint thinner contains low-viscosity petroleum distillates, which must be in child-resistant packaging, as required by the?Poison Prevention Packaging Act. The bottles are not child-resistant, posing a risk of serious injury or death from poisoning if the contents are swallowed by young children. Additionally, petroleum distillates can get into the lungs, causing chemical pneumonia and/or pulmonary damage, which can be fatal.
Be the first to know when products like this are recalled. Free weekly digest, unsubscribe anytime.