CPSC
Branch Recalls Ergonomic Chairs Due to Fall Hazard
The backrests of the chairs can detach, posing a fall hazard to consumers.
CPSC
Milwaukee Tool Recalls M18 FUEL 14" and 12" Top Handle Chainsaws Due to Laceration Hazard
Milwaukee Tool M18 FUEL 14" and 12" Top Handle Chainsaws was recalled on October 30, 2025 in cooperation with the U.S. Consumer Product Safety Commission because the recalled chainsaw's chain brake may not activate, posing a laceration hazard..
Is my unit affected?
This recall involves the M18 FUEL Top Handle Chainsaw, catalog number 2826-20 with a serial break identified with "A" in the product's serial number. The catalog number can be found on the upper right portion of the product's nameplate. The serial number can be found on upper left portion of the nameplate, and the serial break level is the 4th digit of the serial number. The product is a battery-operated chainsaw that comes with either a 12" or 14" bar, which is intended for use with Milwaukee's M18 batteries. The product is sold either individually as a bare tool that includes a chain and bar cover and blade wrench, or as a kit that includes two (2)M18 batteries, an M18 battery charger, a chain and bar cover and a blade wrench.
Units affected: About 90,860 (In addition, about 7,500 were sold in Canada)
Where it was sold: Home Depot and other home improvement stores and online at homedepot.com, and other distribution partners from March 2023 through September 2024 for about $350 (tool only) or $790 with batteries and charger.
Compare the codes above against the label on your product — usually on the bottom, the back panel, or the packaging. If your unit isn't listed, it is not part of this recall.
What's the hazard?
The recalled chainsaw's chain brake may not activate, posing a laceration hazard.
Your remedy & how to claim it
Consumers should immediately stop using the recalled chainsaw and contact Milwaukee Tool for a free repair. Consumers should register their product at https://service.milwaukeetool.com/support/eservice to receive a prepaid shipping label to return their product to Milwaukee Tool for repair. (Remedy: Repair)
Contact: Milwaukee Tool toll-free at 833-953-2012 from 7 a.m. to 4:30 p.m. CT Monday through Friday, eService portal at https://service.milwaukeetool.com/support/eservice or online at https://www.milwaukeetool.com/news/press-releases and clicking on the 2025 tab for more information, or at http://www.milwaukeetool.com/support/recall.
Not sure what you're entitled to? Read our guide: what to do if your product is recalled.
Official recall notice
Always confirm details on the official notice from the U.S. Consumer Product Safety Commission before acting.
View official notice →Related recalls
- CPSC
Daikin Comfort Technologies Manufacturing Recalls Amana Through-The-Wall Air Conditioners and Heat Pumps Due to Risk of Serious Injury from Fire
The snubber circuit can emit flames if it shorts, posing a risk of serious injury due to fire hazard.
- CPSC
Gizoon Direct Recalls Six-Drawer Double Dressers Due to Risk of Serious Injury or Death from Tip-Over and Entrapment Hazards; Violates Mandatory Standard for Clothing Storage Units
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
- CPSC
MONDRAKER USA Recalls Mountain Bicycles Equipped with ONOFF S9 Carbon MTB Handlebars Due to Risk of Serious Injury or Death from Fall Hazard
The affected handlebars may crack or fracture during use, which can lead to loss of control, posing a risk of serious injury or death from fall hazard.
Get recall alerts
Be the first to know when products like this are recalled. Free weekly digest, unsubscribe anytime.